Linux 虚拟网络接口 实例
In the Linux (or Unix) world, most network interfaces, such as eth0 and ppp0, are associated with a physical device that is in charge of transmitting and receiving data packets. However, some logical network interfaces don t feature any physical packet transmission. The most ...
zemax源码：
This DLL models a standard ZEMAX surface type, either plane, sphere, or conic
The surface also demonstrates a user-defined apodization filter
The filter is defined as part of the real ray trace, case 5
The filter can be used at the stop to produce x-y Gaussian apodization similar to t ...
THIS M-FILE USES THE TRANFER MATRIX METHOD TO EVALUATE THE COUPLED-MODE
％EQUATIONS. THE REFLECTION SPECTRUM OF THE GRATING AND THE TRANSMISSION
％SPECTRUM, DELAY AND DISPERSION OF THE FABRY-PEROT FILTER ARE SIMULATED
In this edition, the majority of the book is dedicated to covering the Winsock API. Chapter 1 starts with an introduction to Winsock and is specifically geared for the beginning Winsock programmer. This chapter covers all the basics and introduces Transmission Control Protocol (TCP) and User Datagra ...
This book describes the following communications applications: Mail, Message Handler( MH), Transmission ControlProtocol/ Internet Protocol(TCP/ IP), Basic Networking Utilities( BNU), and Asynchronous Terminal Emulation( ATE). It provides overviews, concepts, and procedures on receiving and sending m ...
The purpose of this application note is to describe the main elements of
an RS-422 and RS-485 system. This application note attempts to cover
enough technical details so that the system designer will have considered all
the important aspects in his data system design. Since both RS-422 and RS-
485 a ...
ITU-T G.729语音压缩算法。
description:
Fixed-point description of commendation G.729 with ANNEX B Coding of Speech at 8 kbit/s using Conjugate-Structure Algebraic-Code-Excited Linear-Prediction (CS-ACELP) with Voice Activity Decision(VAD), Discontinuous Transmission(DTX), and Comfort Noise Generatio ...
Using spectra to calculate strength of reflections and losses in passive cavities.The wavelength, reflection spectrum and transmission spectrum should be in the first 3 columns of an Excel file, which is selected when the cavity.m Matlab file is run.
Carrier-phase synchronization can be approached in a
general manner by estimating the multiplicative distortion (MD) to which
a baseband received signal in an RF or coherent optical transmission
system is subjected. This paper presents a unified modeling and
estimation of the MD in finite-alphabet d ...
