There are many different (and often confusing) terms associated
with clock-based devices. This application note attempts
to clarify these terms, and hence serves as a comprehensive
reference on clock terminology. This application note can be
divided into two sections. The first section describes and ...
Carrier-phase synchronization can be approached in a
general manner by estimating the multiplicative distortion (MD) to which
a baseband received signal in an RF or coherent optical transmission
system is subjected. This paper presents a unified modeling and
estimation of the MD in finite-alphabet d ...
smsc911x 网卡驱动
This the users/programmers guide for the LAN911x Linux Driver
The following sections can be found below
* Revision History
* Files
* Features
* Driver Parameters
* Rx Performance Tuning
* Tested Platforms
* Rx Code Path
* Tx Code Path
* Platform Interface Descriptions ...
This package contains the Wireless tools, used to manipulate
the Wireless Extensions. The Wireless Extensions is an interface
allowing you to set Wireless LAN specific parameters and get the
specific stats.
TI warrants performance of its products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized
to the extent TI deems necessary to support this warranty. Specific testing of all parameters of
each dev ...
CheckMate is a MATLAB-based tool for modeling, simulating and investigating properties of hybrid dynamic systems. Hybrid systems are modeled using the Simulink graphical user interface (GUI). Parameters and specifications are entered using both the Simulink GUI and user-defined m-files. CheckMate co ...
JVT-S203 contains the JSVM 6 reference software. It corresponds to CVS tag “JSVM_5_12_1”.
For obtaining future versions of the software, the CVS server can be accessed using any CVS client. The server is configured to allow read access only using the parameters specified in Table 1. Write access ...
Synthesizable FIFO Model
This example describes a synthesizable implementation of a FIFO. The FIFO depth and FIFO width in bits can be modified by simply changing the value of two parameters, `FWIDTH and `FDEPTH. For this example, the FIFO depth is 4 and the FIFO width is 32 bits.
CP detector (CPD) only reports the onset and removal of a tone. The analysis of timing (if required) shall
be responsibility of a higher-level application due to uncontrollable variability of those parameters from
country to country.FOR TI C54X/C55X
