This source code has been tested under OpenWindows 2.0, Sun s X11/NeWS
server. For Xlib programs that use KeyPress events you should either
(1) set the FocusLenience resource to `True , or (2) specifically notify
the window manager that you want to receive KeyPress/KeyRelease events
(but only in pro ...
This example provides a description of how to set a communication with the bxCAN
in loopback mode:
- transmit and receive a standard data frame by polling at 100Kbit/S
- transmit and receive an extended data frame with interrupt at 500Kbit/S
- lit some LEDs depending of the program succeed or not ...
富士通单片机MB902420系列
CAN Project:
CAN0 will work as a simple Repeater.
Received data will appear at Port P47..P40 (UserLEDs of FlashCan100P)
and will send out again as byte-packages to ID#2
Receive-Buffer #1 : basic can
Transmit-Buffer #6 : full-can ID #2
富士通单片机MB902420系列
extINT Project:
All external Interrupt-Pins INT0 .. INT7 will be enabled.
A falling edge on INTx will toggle PDR4_P4x
in order to toggle the LEDx of the Flash-CAN-100P Board
e.g. falling edge on INT3 will result in LED D3 will toggleP47..P40 (UserLEDs of FlashCan100P)
and ...
This designs demonstrates how to use the Ethernet port using a Nios II system on the DE2 board. It sends packets, and using a loopback Ethernet cable, it ll receive the same packets which are then displayed. It also works if the board is connected to another packet source.
FT245U169 FIFO Loopback
This program transmits data through the FT245BM FIFO data bus to the MSP430F169 on Port 4.
The data is decremented and sent back out of Port 4 to to FIFO on the FT245BM.
Use Hyperterminalto send and receive data.
FIFO control lines are on Port2 (P2.0-P2.3).
A Matlab code to plot the matched filter for 16-element linear array with constant phase weights on transmit and receive LFM waveform parameters.计算具有收发线性调频波形参数的相位权重的16单元线性匹配滤波器
