**********************************************************************
* File: DelayUs.asm
* Devices: TMS320F281x
* Author: David M. Alter, Texas Instruments Inc.
* History:
* 12/18/07 - original (D. Alter)
**********************************************************************
WDKEY .set 0x7025
**********************************************************************
* Function: DelayUs()
* Description: Implements a time delay
* DSP: TMS320F2812, TMS320F2811, TMS320F2810
* Include files: none
* Function Prototype: void DelayUs(unsigned int)
* Useage: DelayUs(Usec);
* Input Parameters: unsigned int Usec = time delay in microseconds
* Return Value: none
* Notes:
* 1) The execution time of this routine is based upon a 150 MHz
* CPUCLK. It also assumes that the function executes out of
* internal RAM. If executing out of internal flash, the
* execution speed will be slightly slower. However, the inner
* loop of this function is essentially invariant to the memory
* it is running in. Therefore, even when running in flash
* memory, the basic loop time will be only slightly longer than
* 1 us.
*
* 2) The outer loop of this function is interruptible (i.e., every
* 1 us). The user should disable interrupts before calling the
* function if they need an exact delay time, as opposed to a
* minimum delay time.
*
**********************************************************************
.def _DelayUs
.text
_DelayUs:
MOVB AH, #0 ;Zero AH
PUSH ST1 ;Save ST1 to preserve EALLOW setting
DelayUs1: ;Outer loop
;Service the watchdog in case it is active
EALLOW
MOVZ DP, #(WDKEY>>6)
MOV @WDKEY, #0x0055
MOV @WDKEY, #0x00AA
EDIS
;Proceed with the inner loop
RPT #138 ;Inner loop
|| NOP
SUBB ACC,#1 ;Decrement outer loop counter
BF DelayUs1, GT ;Branch for outer loop
;Finish up
POP ST1 ;Restore ST1
LRETR ;Return
;end of function DelayUs()
**********************************************************************
.end
;end of file DelayUs.asm
