**********************************************************************
* File: DelayUs.asm *
* Devices: TMS320F2808, TMS320F2806, TMS320F2801 *
* Author: David M. Alter, Texas Instruments Inc. *
* History: *
* 11/13/05 - added save/restore of ST1 to preserve EALLOW setting *
* (D. Alter) *
* 05/02/05 - added watchdog servicing in outer loop (D. Alter) *
* 02/11/05 - original (D. Alter) *
**********************************************************************
WDKEY .set 0x7025
**********************************************************************
* Function: DelayUs() *
* Description: Implements a time delay. *
* DSP: TMS320F2808, TMS320F2806, TMS320F2801 *
* Last Modified: 05/02/05 *
* Include files: none *
* Function Prototype: void DelayUs(unsigned int) *
* Useage: DelayUs(Usec); *
* Input Parameters: unsigned int Usec = time delay in microseconds *
* Return Value: none *
* Notes: *
* 1) The execution time of this routine is based upon a 100 MHz *
* CPUCLK. It also assumes that the function executes out of *
* internal RAM. If executing out of internal flash, the *
* execution speed will be slightly slower. However, the inner *
* loop of this function is essentially invariant to the memory *
* it is running in. Therefore, even when running in flash *
* memory, the basic loop time will be only slightly longer than *
* 1 us. *
* *
* 2) The outer loop of this function is interruptible (i.e., every *
* 1 us). The user should disable interrupts before calling the *
* function if they need an exact delay time, as opposed to a *
* minimum delay time. *
* *
**********************************************************************
.def _DelayUs
.text
_DelayUs:
MOVB AH, #0 ;Zero AH
PUSH ST1 ;Save ST1 to preserve EALLOW setting
DelayUs1: ;Outer loop
;Service the watchdog in case it is active
EALLOW
MOVZ DP, #(WDKEY>>6)
MOV @WDKEY, #0x0055
MOV @WDKEY, #0x00AA
EDIS
;Proceed with the inner loop
RPT #88 ;Inner loop
|| NOP
SUBB ACC,#1 ;Decrement outer loop counter
BF DelayUs1, GT ;Branch for outer loop
;Finish up
POP ST1 ;Restore ST1
LRETR ;Return
;end of function DelayUs() ******************************************
;end of file DelayUs.asm
.end
