The Infineon TriCore provides an Interrupt System with a high safety standard. Thisdocument contains some instructions on how to initiate an Interrupt from an externaldevice. First it will show you how to trigger an Interrupt Service Request by an impulseon Port 0 or Port 1. Then in the second part ...
The 87LPC76X Microcontroller combines in a small package thebenefits of a high-performance microcontroller with on-boardhardware supporting the Inter-Integrated Circuit (I2C) bus interface.The 87LPC76X can be programmed both as an I2C bus master, aslave, or both. An overview of the I2C bus and descr ...
KphoneSI (kpsi) is a SIP (Session Initiation Protocol) user agent
for Linux, with which you can initiate VoIP (Voice over IP) connections
over the Internet, send Instant Messages, subscribe your friends
presence information and start other applications of your choice
Hammerhead2 is a stress testing tool designed to test out
your web server and web site. It can initiate multiple
connections from IP aliases and simulated numerous (256+)
users at any given time
The Inter IC bus or I2C bus is a simple bidirectional two wire bus designed primarily for general control
and data transfer communication between ICs.
Some of the features of the I2C bus are:
• Two signal lines, a serial data line (SDA) and a serial clock line (SCL), and ground are required. A
...
selects the mux channel and configures the MAX197 for
second write pulse, written with ACQMOD = 0, termi-
either unipolar or bipolar input range. A write pulse (WR
nates acquisition and starts conversion on WR°Os risin
+ CS) can either start an acquisition interval or initiate a
edge (Figure 6). Ho ...
selects the mux channel and configures the MAX197 for
second write pulse, written with ACQMOD = 0, termi-
either unipolar or bipolar input range. A write pulse (WR
nates acquisition and starts conversion on WR°Os risin
+ CS) can either start an acquisition interval or initiate a
edge (Figure 6). Ho ...
selects the mux channel and configures the MAX197 for
second write pulse, written with ACQMOD = 0, termi-
either unipolar or bipolar input range. A write pulse (WR
nates acquisition and starts conversion on WR°Os risin
is restarted.
The ACQMOD bit in the input control byte offer+ CS) can either sta ...
