The following Philips LPC2k CAN examples in this directory
were provided by ESAcademy.
LPC2_CANAll_V110:
Receives all CAN messages in a receive queue.
LPC2_CANFull_V110:
Uses Full-CAN-like reception filtering.
LPC2_CANBlinky_V130:
Minimal example of MicroCANopen, uses Full-CAN-like
reception fil ...
The following Philips LPC2k CAN examples in this directory
were provided by ESAcademy.
LPC2_CANAll_V110:
Receives all CAN messages in a receive queue.
LPC2_CANFull_V110:
Uses Full-CAN-like reception filtering.
LPC2_CANBlinky_V130:
Minimal example of MicroCANopen, uses Full-CAN-like
reception fil ...
The following Philips LPC2k CAN examples in this directory
were provided by ESAcademy.
LPC2_CANAll_V110:
Receives all CAN messages in a receive queue.
LPC2_CANFull_V110:
Uses Full-CAN-like reception filtering.
LPC2_CANBlinky_V130:
Minimal example of MicroCANopen, uses Full-CAN-like
reception fil ...
A system simulation environment in Matlab/Simulink of RFID is constructed in this paper.
Special attention is emphasized on the analog/RF circuit.Negative effects are concerned in the system
model,such as phase noise of the local oscillator,TX-RX coupling,reflection of the environment,
AWGN noise,DC ...
smsc911x 网卡驱动
This the users/programmers guide for the LAN911x Linux Driver
The following sections can be found below
* Revision History
* Files
* Features
* Driver Parameters
* Rx Performance Tuning
* Tested Platforms
* Rx Code Path
* Tx Code Path
* Platform Interface Descriptions ...
基于OFDM的无线宽带系统仿真It contains mainly two parts, i.e. link-level simulator and system-level simulator.
Link-level simulator focus on a single-cell single-user scenario, where signal is transmitted from tx, and estimated at rx. Comparing the difference in tx/rx signal, the error rate can be f ...
NRF905驱动代码
// The content of this struct is nRF905 s initialize data.
// CH_NO=1 433MHZ Normal Opration,No Retrans RX,TX Address is 4 Bytes
// RX TX Payload Width is 32 Bytes Disable Extern Clock Fosc=16MHZ
// 8 Bits CRC And enable
