TION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
WARNING!
Although the AD7008 features proprietary ESD protection circuitry, permanent damage may
occur on devices ...
LCD Driver datasheet
The SPF54126A, a 262144-color System-on-Chip (SoC) driver LSI designed for small and medium sizes of TFT LCD display, is capable of
supporting up to 176xRGBx220 in resolution which can be achieved by the designated RAM for graphic data. The 528-channel source
driver has true 6-b ...
The ADC0803 family is a series of three CMOS 8-bit successive
approximation A/D converters using a resistive ladder and
capacitive array together with an auto-zero comparator. These
converters are designed to operate with microprocessor-controlled
buses using a minimum of external circuitry. The 3-S ...
DESCRIPTION
The DCP0105 family is a series of high efficiency, 5V
input isolated DC/DC converters. In addition to 1W
nominal galvanically isolated output power capability,
the range of DC/DCs are also fully synchronizable.
The devices feature thermal shutdown, and overload
protection is implemented ...
R1EX24xxx series are two-wire serial interface EEPROM (Electrically Erasable and Programmable
ROM). They realize high speed, low power consumption and a high level of reliability by employing
advanced MNOS memory technology and CMOS process and low voltage circuitry technology. They
also have a 128- ...
Microprocessors are getting smaller, cheaper and faster. Every day, it is easier to embed more functionality into a smaller space. Embedded processors have become pervasive, and as time goes on, more and more functions that were once ...
transimpedance linearization circuitry. This allows it to drive
video loads with excellent differential gain and phase perfor
mance on only 50 mW of power. The AD8001 is a current
feedback amplifier and features gain flatness of 0.1 dB to 100 MHz
while offering differential gain and ph ...
Microengineering and Microelectromechanical systems (MEMS) have very few
watertight definitions regarding their subjects and technologies. Microengineering
can be described as the techniques, technologies, and practices involved in the
realization of structures and devices with dimensions on the ord ...
The PW5300 is a current mode boost DC-DC converter. Its PWM circuitry with built-in 0.2Ω powerMOSFET make this regulator highly power efficient. The internal compensation network alsominimizes as much as 6 external component counts. The non-inverting input of error amplifierconnects to a 0.6V preci ...
The PW2601 is a charger front-end integrated circuit designed to provide protection to Li-ionbatteries from failures of charging circuitry. The device monitors the input voltage, battery voltageand the charging current to make sure all three parameters are operated in normal range. Thedevice will sw ...
