arm2410 2.4内核的can总线源码以及驱动

				
				
				
				礦ision2 Build Log
				Project:
				D:\单片机调试\完整\can模块.uv2
				Project File Date:  06/30/2005
				
				Output:
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1659
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1687
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1687
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1687
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				MAIN.C(112): error C141: syntax error near '}'
				compiling Targetinit.c...
				Target not created
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1717
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1718
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1718
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1699
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				MAIN.C(139): error C202: 'l': undefined identifier
				compiling Targetinit.c...
				Target not created
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1696
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1678
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1686
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				MAIN.C(187): error C141: syntax error near ''
				compiling Targetinit.c...
				Target not created
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				MAIN.C(187): error C141: syntax error near ''
				compiling Targetinit.c...
				Target not created
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				MAIN.C(187): error C141: syntax error near ''
				compiling Targetinit.c...
				Target not created
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				MAIN.C(187): error C141: syntax error near ''
				compiling Targetinit.c...
				Target not created
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1695
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1679
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1679
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1679
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1679
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1815
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1815
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				MAIN.C(161): error C202: 'oxaa': undefined identifier
				compiling Targetinit.c...
				Target not created
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1826
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				MAIN.C(115): error C141: syntax error near 'else'
				compiling Targetinit.c...
				Target not created
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1854
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1878
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1878
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1878
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				MAIN.C(18): error C141: syntax error near 'unsigned'
				compiling Targetinit.c...
				Target not created
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1878
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=55.0 xdata=0 code=1866
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=55.0 xdata=0 code=1870
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1882
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1897
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				MAIN.C(176): error C141: syntax error near ';'
				MAIN.C(176): error C141: syntax error near ')'
				MAIN.C(182): error C141: syntax error near 'else'
				compiling Targetinit.c...
				Target not created
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=63.0 xdata=0 code=1897
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).
				Build target 'Target 1'
				compiling MCP2510.c...
				compiling Main.c...
				compiling Targetinit.c...
				linking...
				Program Size: data=55.0 xdata=0 code=1892
				creating hex file from "can模块"...
				"can模块" - 0 Error(s), 0 Warning(s).