黑客培训教程

源代码在线查看: the myth of the 2600hz detector .txt

软件大小: 9884 K
上传用户: teasler111
关键词: 黑客 培训教程
下载地址: 免注册下载 普通下载 VIP

相关代码

								   The Myth of the 2600Hz Detector				   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 				 				    Just about everyone I talk to				these days about ESS seems to be				scared witless about the 2600Hz				detector.  I don't know who thought				this one up, but it simply does not				exist.  So many of you people whine				about this so-called phreak catching				device for no reason.  Someone with				AT&T said they had it to catch phrea-				kers.  This was just to scare the				Blue-Boxers enough to make them quit				boxing free calls.				    I'm not saying ESS is without its				hang-ups, either.  One thing that ESS				can detect readily is the kick-back				that the trunk circuitry sends back				to the ESS machine when your little				2600Hz tone resets the toll trunk. 				After an ESS detects a kick-back it				turns an M-F detector on and recordes				any M-F tones X-mitted.				---------------------------------------				   DEFEATING THE KICK-BACK DETECTOR				   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 				 				     As mentioned in my previous				note, kick-back detection can be a				serious nuisance to anyone interested				in gaining control of a trunk line.				     The easiest way to by-pass this				detection circuitry is not really by-passing				it at all, it is just letting the				kick-back get detected on some other line.				     This other line is your local				MCI, SPRINT, or other long distance				carrier (except AT&T).  The only				catch is that the service you use				must not disconnect the line when				you hit the 2600Hz tone.				This is how you do it:  Call				up your local extender, put in the				code, and dial a number in the 601				area code and the 644 exchange.				Lots of other exchanges work across				the country, I'm sure, but this is				the only one that I have found so				far.  Anyway, when it starts ringing,				simply hit 2600Hz and you'll hear the				kick-back, (ka-chirp, or whatever).				Then you are ready to dial whoever				you want (conferences, inward, route				 and rate, overseas, etc.) from the				trunk line in operator tones!				Since blowing 2600Hz doesn't make you				you a phreaker until the toll equip-				ment resets the line, kickback				detection is the method AT&T chooses				(for now).				     This information comes as a				result of my experiments & experience				and has been verified by local AT&T				employees I have as acquaintances.				They could only say that this is				true for my area, but were pretty				sure that the same idea is imple-				mented across the country.								=======================================								Now that you know how to access a trunk				line or as operators say a loop, I will				tell you the many things you can do				with it.								Here is a list of AT&T services acces-				sible to you by using a Blue Box.								        A/C+101    Toll Switching				        A/C+121    Inward operator				        A/C+131    Information				        A/C+141    Route & Rate op.				        A/C+11501  Mobile operator				        A/C+11521  Mobile operator																Starting Conferances:				---------------------								This is one the most useful attributes				of blue boxing. Now the confs. are up				24 hours/day and 7 days/week and the				billing lines are being billed. 				Since I beleive the above is true				(about the billing lines being billed)				I would recommend that you never let				your # show up on the conf. if you 				started it, put it on a loop and then				call the loop. ENOUGH BULLSHIT!!!!!				To start the conf. dial one of these				three numbers in M-F while you are on				the trunk.								213+080+XXXX				XXXX=1050,3050				special XXXX=1000,1100,1200,1500,2200,				2500.				     These #s are in L.A. and are the				most watched, I do not advise using 				this NPA.								312+001+1050 or 3050								914+042+1050 or 1100,1200 ect..												***************************************				UPDATE, I BELEIVE ONLY 914 WORKS AT THE				MOMENT				***************************************								Once connected with one of these you				will either hear a re-order, busy, or				cherp. When you hear the cherp enter				the billing line in M-F. I use the				conf. dial- up.				  A billing line example:				       kp312+001+1050st				You will then hear two tutes and a re-				cording asking you for the # of confer-				rees including yourself.  Enter a #				between 20 and 30. If you ever get over				30 people on a conferance all you will				hear is jumbled voices.  After the it				says "Your conferance size is XX" then				hit # sign.  Add Your favorite loop on				and hit 6 to transfer control to it.				After it says control will be transfer-				ed hang up and call the other side of				the loop, hit #sign and follow the in-				structions. A bonus for conf. is to add				an international # dial 1+011+CC+NUMBER				pretty cool ehhh.				A few extra notes.				    Do not add #s that you will want to				    hang up, add these through MCI or				    Sprint. 								    You cannot blow anyone off w/2600hz				    unless they are in an old X-bar or				    older system.								    Many D.A. operators will stay on 				    after you abuse them; you may have				    to start another or at least don't				    say any numbers.								    Never add the tone side of a loop				    onto a conf.								    Never add more than one MCI node on				    your conf.												Route & Rate:				-------------												Note Route & Rate and RQS perform the 				same service.								     R&R simply tells you route and rate info which is very valuble, ex.				such as the inward routing for an ex-				change in an area code.  An inward 				routing will let you call her and she				can do an emergency interupt for you.				She can tell you how to get interna-				tional operators, ect.								Here are the terms you are required to				use:								     International,				        -operator route				           for [country, city].				           *Gives you inward op.				        -directory route				           for [country, city].				           *Gives you Directory Ass.				        -city route				           for [country, city].				           *Gives you country and city				            code.								     Operator route for [A/C]+				        [EXCHANGE]				        *Gives you inward op. route				         ex. [A/C]+ or [A/C]+0XX+				         when she says plus she means				         plus 121.				     Numbers route for [state, city]				        *Gives you A/C.								     Place name [A/C]+[EXCHANGE]				        *Gives you city/state for that				        A/C and exchange.																International calls:				--------------------												To call international over cable simply				access a trunk and dial kp011XXXst				 wait for sender tone, kpXXXCC-NUMBERst								XXX - A 3 digit country code, it may 				not be 3 digits so just put 1 or 2 0's				in front of it.				CC - is the city code								To go by satellite:				     dial kp18Xst    X - numbers 2-8				     wait for sender tone then				     kpXXXCCNUMBERst												---------------------------------------								Fedex will put out a file on RQS soon.								Written by:           Scarface				                         &				                       Zardoz								DISTRIBUTED THROUGH THE PIRATE CLUB/1200				CALL THE PIRATE CLUB/1200 AE LINE: 814-234-1667 PW: SWITCH 300/1200 BAUD				CALL INFINITY'S EDGE: 814-237-0216 300/1200 BAUD								CRACKER JACK				THE PIRATE CLUB/1200				THE CONNECTION I/O				DOS BUSTERS							

相关资源