////////////////////////////////////////////////////////////////////// //// //// //// 8051 ram select //// //// //// //// This file is part of the 8051 cores project //// //// http://www.opencores.org/cores/8051/ //// //// //// //// Description //// //// Multiplexer wiht whitch we select data send to alu source //// //// select. //// //// //// //// To Do: //// //// nothing //// //// //// //// Author(s): //// //// - Simon Teran, simont@opencores.org //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // ver: 1 // // synopsys translate_off `include "oc8051_timescale.v" // synopsys translate_on `include "oc8051_defines.v" module oc8051_ram_sel (addr, bit_in, in_ram, psw, acc, dptr_hi, port0, port1, port2, port3, sp, bit_out, out_data); // addr address // bit_in bit input (from ram) // in_ram imput from ram // psw program status word input // acc accumulator input // dptr_hi data pointer high bits input // port0, port1, port2, port3 ports input // sp stack pointer // bit_out bit output // out_data data (byte) output input bit_in; input [7:0] addr, in_ram, psw, acc, dptr_hi, port0, port1, port2, port3, sp; output bit_out; output [7:0] out_data; reg bit_out; reg [7:0] out_data; // //set output in case of address (byte) always @(addr or in_ram or psw or acc or dptr_hi or port0 or port1 or port2 or port3 or sp) begin case (addr) `OC8051_SFR_ACC: out_data = acc; `OC8051_SFR_PSW: out_data = psw; `OC8051_SFR_P0: out_data = port0; `OC8051_SFR_P1: out_data = port1; `OC8051_SFR_P2: out_data = port2; `OC8051_SFR_P3: out_data = port3; `OC8051_SFR_SP: out_data = sp; `OC8051_SFR_DPTR_HI: out_data = dptr_hi; default: out_data = in_ram; endcase end // //set output in case of address (bit) always @(addr or bit_in or psw or acc or port0 or port1 or port2 or port3) begin case (addr[7:3]) `OC8051_SFR_B_ACC: bit_out = acc[addr[2:0]]; `OC8051_SFR_B_PSW: bit_out = psw[addr[2:0]]; `OC8051_SFR_B_P0: bit_out = port0[addr[2:0]]; `OC8051_SFR_B_P1: bit_out = port1[addr[2:0]]; `OC8051_SFR_B_P2: bit_out = port2[addr[2:0]]; `OC8051_SFR_B_P3: bit_out = port3[addr[2:0]]; default: bit_out = bit_in; endcase end endmodule
