; main.SRC generated from: main.c
$NOMOD51
NAME MAIN
P0 DATA 080H
P1 DATA 090H
P2 DATA 0A0H
P3 DATA 0B0H
T0 BIT 0B0H.4
AC BIT 0D0H.6
T1 BIT 0B0H.5
T2 BIT 090H.0
EA BIT 0A8H.7
IE DATA 0A8H
EXF2 BIT 0C8H.6
RD BIT 0B0H.7
ES BIT 0A8H.4
IP DATA 0B8H
RI BIT 098H.0
INT0 BIT 0B0H.2
CY BIT 0D0H.7
TI BIT 098H.1
INT1 BIT 0B0H.3
RCAP2H DATA 0CBH
PS BIT 0B8H.4
SP DATA 081H
T2EX BIT 090H.1
OV BIT 0D0H.2
RCAP2L DATA 0CAH
C_T2 BIT 0C8H.1
WR BIT 0B0H.6
RCLK BIT 0C8H.5
TCLK BIT 0C8H.4
SBUF DATA 099H
PCON DATA 087H
SCON DATA 098H
TMOD DATA 089H
TCON DATA 088H
IE0 BIT 088H.1
IE1 BIT 088H.3
B DATA 0F0H
CP_RL2 BIT 0C8H.0
ACC DATA 0E0H
ET0 BIT 0A8H.1
ET1 BIT 0A8H.3
TF0 BIT 088H.5
ET2 BIT 0A8H.5
TF1 BIT 088H.7
TF2 BIT 0C8H.7
RB8 BIT 098H.2
TH0 DATA 08CH
EX0 BIT 0A8H.0
IT0 BIT 088H.0
TH1 DATA 08DH
TB8 BIT 098H.3
EX1 BIT 0A8H.2
IT1 BIT 088H.2
TH2 DATA 0CDH
P BIT 0D0H.0
SM0 BIT 098H.7
TL0 DATA 08AH
SM1 BIT 098H.6
TL1 DATA 08BH
SM2 BIT 098H.5
TL2 DATA 0CCH
PT0 BIT 0B8H.1
PT1 BIT 0B8H.3
RS0 BIT 0D0H.3
PT2 BIT 0B8H.5
TR0 BIT 088H.4
RS1 BIT 0D0H.4
TR1 BIT 088H.6
TR2 BIT 0C8H.2
PX0 BIT 0B8H.0
PX1 BIT 0B8H.2
DPH DATA 083H
DPL DATA 082H
EXEN2 BIT 0C8H.3
REN BIT 098H.4
T2CON DATA 0C8H
RXD BIT 0B0H.0
TXD BIT 0B0H.1
F0 BIT 0D0H.5
PSW DATA 0D0H
?PR?main?MAIN SEGMENT CODE
?XD?MAIN SEGMENT XDATA
EXTRN CODE (?C_STARTUP)
PUBLIC mm
PUBLIC main
RSEG ?XD?MAIN
mm: DS 4
; #pragma SRC
; //#pragma SYMBOL
; #include /* special function register declarations */
; /* for the intended 8051 derivative */
;
; #include /* prototype declarations for I/O functions */
;
; #ifdef MONITOR51 /* Debugging with Monitor-51 needs */
; char code reserve [3] _at_ 0x23; /* space for serial interrupt if */
; #endif /* Stop Exection with Serial Intr. */
; /* is enabled */
; union data1/*共用体*/
; {
; int a;
; float b;
; double c;
; char d;
; }mm ;
; struct stud/*结构体*/
; {
; int a;
; float b;
; double c;
; char d;
; } ;
; /*------------------------------------------------
; The main C function. Program execution starts
; here after stack initialization.
; ------------------------------------------------*/
; void main (void) {
RSEG ?PR?main?MAIN
main:
; SOURCE LINE # 30
;
; /*------------------------------------------------
; Setup the serial port for 1200 baud at 16MHz.
; ------------------------------------------------*/
; #ifndef MONITOR51
; SCON = 0x50; /* SCON: mode 1, 8-bit UART, enable rcvr */
; SOURCE LINE # 36
MOV SCON,#050H
; TMOD |= 0x20; /* TMOD: timer 1, mode 2, 8-bit reload */
; SOURCE LINE # 37
ORL TMOD,#020H
; TH1 = 221; /* TH1: reload value for 1200 baud @ 16MHz */
; SOURCE LINE # 38
MOV TH1,#0DDH
; TR1 = 1; /* TR1: timer 1 run */
; SOURCE LINE # 39
SETB TR1
; TI = 1; /* TI: set TI to send first char of UART */
; SOURCE LINE # 40
SETB TI
?C0001:
; #endif
; /*------------------------------------------------
; Note that an embedded program never exits (because
; there is no operating system to return to). It
; must loop and execute forever.
; ------------------------------------------------*/
; // printf("%d,%d",sizeof(struct stud),sizeof(union data1));
;
; while (1) {};
; SOURCE LINE # 49
SJMP ?C0001
; END OF main
END
