/* * linux/arch/arm/mach-omap1/board-h3.c * * This file contains OMAP1710 H3 specific code. * * Copyright (C) 2004 Texas Instruments, Inc. * Copyright (C) 2002 MontaVista Software, Inc. * Copyright (C) 2001 RidgeRun, Inc. * Author: RidgeRun, Inc. * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include extern int omap_gpio_init(void); static struct mtd_partition h3_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { .name = "bootloader", .offset = 0, .size = SZ_128K, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, /* bootloader params in the next sector */ { .name = "params", .offset = MTDPART_OFS_APPEND, .size = SZ_128K, .mask_flags = 0, }, /* kernel */ { .name = "kernel", .offset = MTDPART_OFS_APPEND, .size = SZ_2M, .mask_flags = 0 }, /* file system */ { .name = "filesystem", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, .mask_flags = 0 } }; static struct flash_platform_data h3_flash_data = { .map_name = "cfi_probe", .width = 2, .parts = h3_partitions, .nr_parts = ARRAY_SIZE(h3_partitions), }; static struct resource h3_flash_resource = { /* This is on CS3, wherever it's mapped */ .flags = IORESOURCE_MEM, }; static struct platform_device flash_device = { .name = "omapflash", .id = 0, .dev = { .platform_data = &h3_flash_data, }, .num_resources = 1, .resource = &h3_flash_resource, }; static struct resource smc91x_resources[] = { [0] = { .start = OMAP1710_ETHR_START, /* Physical */ .end = OMAP1710_ETHR_START + 0xf, .flags = IORESOURCE_MEM, }, [1] = { .start = OMAP_GPIO_IRQ(40), .end = OMAP_GPIO_IRQ(40), .flags = IORESOURCE_IRQ, }, }; static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; #define GPTIMER_BASE 0xFFFB1400 #define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800)) #define GPTIMER_REGS_SIZE 0x46 static struct resource intlat_resources[] = { [0] = { .start = GPTIMER_REGS(0), /* Physical */ .end = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE, .flags = IORESOURCE_MEM, }, [1] = { .start = INT_1610_GPTIMER1, .end = INT_1610_GPTIMER1, .flags = IORESOURCE_IRQ, }, }; static struct platform_device intlat_device = { .name = "omap_intlat", .id = 0, .num_resources = ARRAY_SIZE(intlat_resources), .resource = intlat_resources, }; static struct platform_device *devices[] __initdata = { &flash_device, &smc91x_device, &intlat_device, }; static struct omap_usb_config h3_usb_config __initdata = { /* usb1 has a Mini-AB port and external isp1301 transceiver */ .otg = 2, #ifdef CONFIG_USB_GADGET_OMAP .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ #endif .pins[1] = 3, }; static struct omap_mmc_config h3_mmc_config __initdata = { .mmc[0] = { .enabled = 1, .power_pin = -1, /* tps65010 GPIO4 */ .switch_pin = OMAP_MPUIO(1), }, }; static struct omap_uart_config h3_uart_config __initdata = { .enabled_uarts = ((1 }; static struct omap_lcd_config h3_lcd_config __initdata = { .panel_name = "h3", .ctrl_name = "internal", }; static struct omap_board_config_kernel h3_config[] = { { OMAP_TAG_USB, &h3_usb_config }, { OMAP_TAG_MMC, &h3_mmc_config }, { OMAP_TAG_UART, &h3_uart_config }, { OMAP_TAG_LCD, &h3_lcd_config }, }; static void __init h3_init(void) { h3_flash_resource.end = h3_flash_resource.start = omap_cs3_phys(); h3_flash_resource.end += OMAP_CS3_SIZE - 1; (void) platform_add_devices(devices, ARRAY_SIZE(devices)); omap_board_config = h3_config; omap_board_config_size = ARRAY_SIZE(h3_config); omap_serial_init(); } static void __init h3_init_smc91x(void) { omap_cfg_reg(W15_1710_GPIO40); if (omap_request_gpio(40) < 0) { printk("Error requesting gpio 40 for smc91x irq\n"); return; } } void h3_init_irq(void) { omap_init_irq(); omap_gpio_init(); h3_init_smc91x(); } static void __init h3_map_io(void) { omap_map_common_io(); } MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") /* Maintainer: Texas Instruments, Inc. */ .phys_ram = 0x10000000, .phys_io = 0xfff00000, .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = h3_map_io, .init_irq = h3_init_irq, .init_machine = h3_init, .timer = &omap_timer, MACHINE_END
