//44BTEST : 44btest.c
#include
#include "..\inc\option.h"
#include "..\inc\44b.h"
#include "..\inc\44blib.h"
#include "..\inc\def.h"
#include "..\inc\cache.h"
#include "..\inc\lcd.h"
#include "..\inc\lcdlib.h"
#include "..\inc\glib.h"
#include "..\inc\clcd.h"
#include "..\inc\adc.h"
#include "..\inc\uart.h"
#include "..\inc\power.h"
#include "..\inc\dma.h"
#include "..\inc\timer.h"
#include "..\inc\sio.h"
#include "..\inc\rtc.h"
#include "..\inc\etc.h"
#include "..\inc\iic.h"
#include "..\inc\eint.h"
#include "..\inc\flash.h"
#include "..\inc\iis.h"
#include "..\inc\stop.h"
#include "..\inc\idle.h"
#include "..\inc\extdma.h"
#include "..\inc\nwait.h"
#include "..\inc\Am29f800.h"
void AutoTest(void);
void Isr_Init(void);
void HaltUndef(void);
void HaltSwi(void);
void HaltPabort(void);
void HaltDabort(void);
/****************************************************************
* S3C44B0X developer's notes *
****************************************************************
1. 99.6.6:KIW: For H/W vectored interrupt test, add the codes in Isr_Init()
2. 99.8.27: Stop,SL_IDLE mode is modified.
3. 99.10.13: check KS32C41000 date:A937 or after.
4. 99.10.19: AM29LV800 flash writing routine is added
5. 00.4.25:KWT: Modify for S3C44B0X
***************************************************************/
void * function[][2]=
{
#if (LCD_TYPE==MLCD_320_240)
(void *)Test_LcdMono, "Lcd Mono ",
(void *)Test_LcdG4, "Lcd G4 ",
(void *)Test_LcdG16, "Lcd G16 ",
#elif (LCD_TYPE==CLCD_240_320)
(void *)Test_LcdColor, "Lcd Color ",
#endif
(void *)Test_SLIdleMode, "SL_IDLE Mode ",
(void *)Test_SLIdleMode20,
"SL_IDLE Mode20 ",
(void *)Test_IdleMode, "IDLE Mode ",
(void *)Test_IdleModeHard,"IDLE(hard) ",
(void *)Test_WaitPin, "nWAIT pin ",
(void *)Test_ZDma0Xdreq, "nXDREQ0 ",
(void *)Test_Cache, "Cache ",
(void *)Test_Adc, "Adc 0,1,2,3 ",
(void *)Test_DMA_Adc, "Adc with DMA ",
(void *)Test_Uart0, "UART 0 ",
(void *)Test_Uart0Fifo, "UART 0 FIFO ",
(void *)Test_Uart1, "UART 1 ",
(void *)Test_Uart1Fifo, "UART 1 FIFO ",
(void *)Test_SlowMode, "SLOW Mode ",
(void *)Test_HoldMode, "HOLD Mode ",
(void *)Test_StopMode, "STOP Mode ",
(void *)Test_Zdma0, "Zdma0 ",
(void *)Test_Zdma1, "Zdma1 ",
(void *)Test_Sio, "SIO Tx/Rx ",
(void *)Test_SIOTX_BDMA0,"SIO Tx BDMA0 ",
(void *)Test_SIORX_BDMA1,"SIO Rx BDMA1 ",
(void *)Test_WDTimer, "WDTimer ",
(void *)Display_Rtc, "RTC(display) ",
(void *)Test_Rtc_Alarm, "RTC(Test) ",
(void *)Test_Rtc_Tick, "RTC Tick ",
(void *)Test_Iic, "IIC(KS24C080) ",
(void *)Test_Iis, "IIS(uda1341) ",
(void *)Iis_Tx, "IIS Tx(Slave) ",
(void *)Iis_Rx, "IIS Rx(Master) ",
(void *)Test_TimerInt, "Timer Int ",
(void *)Test_Timer, "Tout test ",
(void *)Test_Eint, "Ext. Int ",
(void *)Etc, "Etc... ",
(void *)Test_PLL, "Change PLL ",
(void *)Test_UartAFC_Tx, "Test AFC(Tx) ",
(void *)Test_UartAFC_Rx, "Test AFC(Rx) ",
(void *)ProgramFlash, "Write flash ", 0,0
};
void Main(void)
{
int i;
rSYSCFG=CACHECFG;
#if (PLLON==1)
ChangePllValue(PLL_M,PLL_P,PLL_S);
#endif
//_ctype_init(); //to use ctype.h
Port_Init();
Isr_Init();
Uart_Init(0,115200);
//rSBUSCON=(1 Uart_Select(0);
Delay(0); //calibrate Delay()
while(1)
{
i=0;
Uart_Printf("\n\nS3C44B0X Test Program Ver 0.00 rSYSCFG=0x%x MCLK=%d\n\n",rSYSCFG,MCLK);
while(1)
{ //display menu
Uart_Printf("%2d:%s",i,function[i][1]);
i++;
if((int)(function[i][0])==0)
{
Uart_Printf("\n");
break;
}
if((i%4)==0)
Uart_Printf("\n");
}
Uart_Printf("\nSelect the function to test?");
i=Uart_GetIntNum();
Uart_Printf("\n");
if(i>=0 && (i ( (void (*)(void)) (function[i][0]) )();
}
}
void Isr_Init(void)
{
pISR_UNDEF=(unsigned)HaltUndef;
pISR_SWI =(unsigned)HaltSwi;
pISR_PABORT=(unsigned)HaltPabort;
pISR_DABORT=(unsigned)HaltDabort;
//rINTCON=0x1; // Vectored Int. IRQ enable,FIQ disable
rINTCON=0x5; // Non-vectored,IRQ enable,FIQ disable
rINTMOD=0x0; // All=IRQ mode
rINTMSK=BIT_GLOBAL; // All interrupt is masked.
}
void HaltUndef(void)
{
Uart_Printf("Undefined instruction exception!!!\n");
while(1);
}
void HaltSwi(void)
{
Uart_Printf("SWI exception!!!\n");
while(1);
}
void HaltPabort(void)
{
Uart_Printf("Pabort exception!!!\n");
while(1);
}
void HaltDabort(void)
{
Uart_Printf("Dabort exception!!!\n");
while(1);
}
