/*------------------------------------------------------------------*-
Main.C (v1.00)
------------------------------------------------------------------
Simple test program for I2C (24C64) library.
Connect a 24C64 to the SDA and SCL pins described
in the library file (I2C_Core.C).
Terminating resistors not generally required on the bus.
Pull all three address lines (on the EEPROM) to ground.
COPYRIGHT
---------
This code is from the book:
PATTERNS FOR TIME-TRIGGERED EMBEDDED SYSTEMS by Michael J. Pont
[Pearson Education, 2001; ISBN: 0-201-33138-1].
This code is copyright (c) 2001 by Michael J. Pont.
See book for copyright details and other information.
-*------------------------------------------------------------------*/
#include "Main.h"
#include "I2C_ROM.h"
#include "Delay_T0.h"
// In this test program, we define the error code variable here
// (Usually in the scheduler library)
tByte Error_code_G = 0;
void main( void )
{
tByte data1 = 0;
tByte data2 = 0;
tWord Data_address = 0;
while (1)
{
Data_address = data1;
// Write to eeprom
I2C_Write_Byte_AT24C64(Data_address, data1);
// Read back from eeprom
data2 = I2C_Read_Byte_AT24C64(Data_address);
// Display value from eeprom
P1 = 255 - data2;
// Display error code
P2 = 255 - Error_code_G;
if (++data1 == 255)
{
data1 = 0;
}
Hardware_Delay_T0(1000);
}
}
/*------------------------------------------------------------------*-
---- END OF FILE -------------------------------------------------
-*------------------------------------------------------------------*/
